Would you rather have your equipment pest control spray down for maintenance right now or in the middle of summer?
High season for pest control is approaching. Now is the time when the business is still a little slow to get their equipment of spraying in combating the form of long hours and difficult, no doubt, he will endure. Have a little time to prepare now will reduce downtime during your busy season, as well as help reduce the costs of repairing equipment for correcting small problems before they become major problems.
The first thing to do is give your tank a good cleaning. Tanks often experience a buildup of chemical pesticide waste caused by falling asleep and accumulating at the bottom of the tank. This can cause a variety of problems.
1. build-up may affect the concentration of the material that you are applying. For example, if you're getting toward the bottom of the tank and some of the waste came free, you could apply material at higher than label rates. Alternatively, you can inadvertently applying a chemical other than a previous mix.
2. the residue could come free and clog the filters, hoses, guns, tips, etc. All these results are negative and can affect the availability of equipment, repair costs and productivity. At best, stuffy equipment causes her to lose time. At worst, it will destroy your pump.
3. clean the process will remove other dirt, rock and debris that accumulates in a tank that similarly plays havoc with its downstream components.
Here are some thoughts to clean the Aquarium:
A. obtain the tank as empty as possible without running your pump dry.
B. fill the tank with clean water and run it through your system. Remove the pistol so not clogged. Please check periodically the filter to make sure that it does not clog. Be sure to follow all applicable laws when dealing with rinsing. If you don't have a good place to spray out the rinse, spray it into another tank in a different truck.
C. Add a little more clean water to the tank. At this point that we don't want to fill the tank, we just want enough water to feed the pump and fill the hose. We want most of the tank to be visible. Increase the pressure in the system and use its pressure washing pistol inside the tank. Add more water and spray out this rinsing as in "B" above.
D. fill the tank with water and add the cleaner tank. Tank cleaner is available from your supplier of pest control products. Most of these products uses 1 kilo of tank cleaner per 100 litres of volume of the tank. Put the end of the hose to spray in the tank and allow the system to just move the tank cleaner for a while by label instructions. This will remove any remaining chemical residue. Properly discard the tank cleaner rinsing.
E. execute another tank water through the system to remove any remaining cleaner tank.
F. can sometimes be debris remaining in the tank, after having finished the cleanout. This could be stones, bottle caps, etc. We don't have a good solution for you here. You need to find a way to manually remove this debris so he doesn't end up causing problems later. If your filter is in a low point in the system, it may be easier to remove the filter then use a garden hose to wash the debris out of the Aquarium, then out through the filter.
G. Finally, check and clean your filter to ensure it is free of debris and ready for your busy season.
A clean Aquarium is a good Aquarium. It requires a little effort, but you will be refunded less and less downtime, fewer repairs of expensive equipment. Spend time now to prepare your equipment so that your equipment can make money this summer.
0 komentar:
Posting Komentar